Selecting the specific tracks for playback

Press (5) while pressing (SEL).

Labeling a CD (XR-C540RDS only)

— Disc Memo

(CD changer with custom file function)

You can label each disc with a personalized name. You can enter up to 8 characters for a disc. If you label a CD, you can locate a disc by name and select the specific tracks for playback.

If you connect only an MD changer, you cannot label MD. However, if you connect a CD changer with the custom file function and an MD changer you can label both CD and MD.

Note

When you label an MD, the disc names on the disc itself do not change. The names are stored in the CD changer's custom files.

1 Play the CD and press (PTY/FILE) for two seconds.

2 Enter the characters.

1Press (+) to select the desired

characters.

(A nB nC n··· Z n0 n1 n2 n

··· 9 n+ n– n* n/ n\ n> n< n. n_ )

If you press (Ð), the characters appear in the reverse order.

If you want to put a blank space between characters, select “_” (under- bar).

2Press (SEL) after locating the desired character.

The flashing cursor moves to the next space.

If you press (SEL) when the eighth character (farthest right character) is flashing, the flashing part goes back to the first character (farthest left character).

3Repeat steps 1 and 2 to enter the entire name.

3 To return to the normal CD playback mode, press (PTY/FILE) for two seconds.

Tip

To erase/correct a name, enter “_” (under-bar) for each character.

Displaying the disc memo

Press (DSPL) during CD playback.

Each time you press (DSPL) during CD playback, the item changes as follows:

z Elapsed playback time

z Disc name

Clock Z

Erasing the disc memo

1 Press (SOURCE) to select the CD changer.

2 Play the CD and press (PTY/FILE) for two seconds.

4 Press (+) or (Ð) to select the name that you want to erase.

5 Press (SEL) for two seconds. The name is erased.

Repeat steps 4 and 5 if you want to erase other names.

6 Press (PTY/FILE) for two seconds.

The unit returns to the normal CD playback mode.