14
EN
3Press (5) (ENTER) momentarily.
4To continue entering tracks, repeat steps
2 and 3.
5When you finish entering tracks, press
(3) (PLAY MODE) for two seconds.
6Press (SHIFT).
Notes
•“*Wait*” appears in the display while the unit is reading
the data, or when a disc has not been put into the unit.
•“*Mem full*” appears in the display when you try to
enter more than 12 tracks into a program.
Playing the stored program
Changing the disc order in the changer will not
affect program memory play.
You can select:
•PGM 1 to play Program 1.
•PGM 2 to play Program 2.
•PGM 1+2 to play Programs 1 and 2.
1Press (SHIFT).
2Press (3) (PLAY MODE) repeatedly until
“PGM” appears.
3Press (4) (n) repeatedly until the
desired program appears.
Program play starts.
Program 1 Playback
µ
Program 2 Playback
µ
Programs 1 and 2 Playback
µ
Normal Playback
4Press (SHIFT).
To go back to the normal playback mode,
select “PGM off” in step 3 above.
Notes
•If you press a number button during program memory
play, program memory play is interrupted, and playback
of the selected disc starts.
•“NO Data” appears in the display if no track is stored in
the program.
•If a track stored into the program memory is not in the
disc magazine, the track will be skipped.
•When the disc magazine contains not a single track
stored into the program memory, or when the program
information has not been loaded yet, “Not Ready”
appears.
Erasing the entire program
1Press (SHIFT), then press (3) (PLAY
MODE) for two seconds.
If you have labeled the disc, the bank edit
mode appears. Press (3) (PLAY MODE) to
display “P1” above.
2Press (1) (N) repeatedly until “DEL”
appears.
To erase Program 2, press (4) (n)
repeatedly until “P2” appears.
3Press (5) (ENTER) for two seconds.
The entire program is erased.
4When you finish erasing programs, press
(3) (PLAY MODE) for two seconds.
5Press (SHIFT).
Adding tracks to the program
1Press (SHIFT), then press (3) (PLAY
MODE) for two seconds.
If you have labeled the disc, the bank edit
mode appears. Press (3) (PLAY MODE) to
display “P1” above.
To select Program 2, press (4) (n)
repeatedly until “P2” appears.
2Press (1) (N) or (4) (n) to select the
track slot number where you want to
insert a track.

DEL

--PGM1--
PLAYMODE ENTER
SUR EQ

P1

NO Data
PLAYMODE ENTER
SUR EQ
Track slot number

CD1

PGM 1
PLAYMODE
PGM1
SUR EQ

CD1

PGM 2
PLAYMODE
PGM 2
SUR EQ

CD1

PGM 1+2
PLAYMODE
PGM1 2
+
SUR EQ

CD1

PGM off
PLAYMODE
SUR EQ
µ

CD1

3 2 P1.‚7
PLAYMODE
TRACKDISC
SUR EQ

P1

+Enter+
PLAYMODE ENTER
SUR EQ

CD1

2 4 P1.‚2
PLAYMODE
TRACKDISC
SUR EQ