6
EN
Locating the beginning of a track
— Automatic Music Sensor (AMS)
You can skip up to nine tracks at one time.
During playback, press either side of
(SEEK/AMS) momentarily.
Note
The AMS function may not work when:
•the blanks between tracks are shorter than four seconds.
•there is noise between tracks.
•there are long sections of low volume or quiet sections.
Changing the displayed item
Each time you press (DSPL), the item changes
as follows:
z Tape playback z Clock z Frequency*
*While the ATA function is activated.
Playing tracks repeatedly
— Repeat play
You can repeat play the current track.
1During playback press (SHIFT).
Each time you press (SHIFT), only the items
you can select light up.
2Press (6) (REP).
Repeat play starts.
To go back to the normal playback mode, press
(6) again.
3Press (SHIFT).
Playing a tape in variousmodes
You can play the tape in various modes:
•Intro (Intro Scan) lets you play the first 10
seconds of all the tracks.
•NR (Dolby NR) lets you select the Dolby* NR
B or C system.
•ATA (Automatic Tuner Activation) turns on
the tuner automatically while fast-winding
the tape.
•B.Skip (Blank Skip) skips blanks longer than
eight seconds.
∗Dolby noise reduction manufactured under license
from Dolby Laboratories Licensing Corporation.
“DOLBY” and the double-D symbol a are
trademarks of Dolby Laboratories Licensing
Corporation.
1Press (SHIFT), then press (3) (PLAY
MODE) repeatedly until the desired play
mode appears.
Each time you press (3), the item changes
as follows:
Intro n NR n ATA n B.Skip
2Press (4) (n) to select the desired play
mode setting (for example: on, NR B).
Playback starts.
3Press (SHIFT).
To go back to the normal playback mode,
select “off” in step 2 above.
SEEK/AMS
To locate
succeeding tracks
To locate preceding
tracks
123456
SHIFT
PLAY MODE
REP
FWD

Intro off

PLAYMODE
SUR EQ
FWD

Intro on

PLAYMODE
SUR EQ