General
Outputs | Line outputs (3) |
| Power antenna relay control |
| lead |
| Power amplifier control |
| lead |
| Telephone ATT control |
| lead |
| Illumination control lead (C8100) |
Tone controls | Bass ± 10 dB at 100 Hz |
| Treble ± 10 dB at 10 kHz |
Power requirements | 12 V DC car battery |
| (negative ground) |
Dimensions | Approx. 178 × 50 × 180 mm |
| (w/h/d) |
Mounting dimensions | Approx. 182 × 53 × 160 mm |
| (w/h/d) |
Mass | Approx. 1.5 kg |
Supplied accessories | Rotary commander |
| Wireless remote |
| |
| Parts for installation and |
| connections (1 set) |
| Front panel case (1) |
Design and specifications are subject to change without notice.
Dolby noise reduction manufactured under license from Dolby Labo-
ratories Licensing Corporation.
“DOLBY” and the
Laboratories Licensing Corporation.
Notes on Chip Component Replacement
∙Never reuse a disconnected chip component.
∙Notice that the minus side of a tantalum capacitor may be damaged by heat.
TABLE OF CONTENTS
1. GENERAL
Location of Controls | ............................................................... 3 |
Getting Started | 4 |
Setting the Clock | 4 |
Cassette Player | 5 |
Radio | 6 |
RDS | 7 |
Other Functions | 10 |
CD/MD Unit | 11 |
Connections | 16 |
2. DISASSEMBLY
Cover | 18 | |
Front Panel Assy | 18 | |
Sub Panel Assy | 19 | |
Mechanism Deck | 19 | |
Main Board | 20 | |
Heat Sink | 20 |
3. ASSEMBLY OF MECHANISM DECK
Housing | 21 | |
Arm (Suction) | 21 | |
Lever | 22 | |
Gear (Loading FT) | 22 | |
Guide (C) | 23 | |
Mounting Position of Capstan/Reel Motor (M901) | 23 | |
4. MECHANICAL ADJUSTMENTS | 24 | |
5. ELECTRICAL ADJUSTMENTS |
| |
Tape Section | 24 | |
Tuner Section | 25 | |
6. DIAGRAMS |
| |
29 | ||
31 | ||
33 | ||
36 | ||
Schematic Diagram | 41 | |
Printed Wiring Board | 46 | |
Schematic Diagram | 48 | |
IC Pin Description | 51 |
7. EXPLODED VIEWS
Chassis Section | 57 | |
Front Panel Section | 58 | |
Mechanism Deck Section | 59 | |
8. ELECTRICAL PARTS LIST | 60 |
– 2 –