When connecting to your TV via a VCR
Connect your camcorder to the LINE IN input on the VCR using the A/V connecting cable. Set the input selector on the VCR to LINE (VIDEO 1, VIDEO 2, etc.).
When your TV is monaural (When your TV has only one audio input jack)
Connect the yellow plug of the A/V connecting cable to the video input jack and connect the white (left channel) or red (right channel) plug to the audio input jack of your TV or VCR.
If your TV/VCR has a
You need the
TV/VCR
Notes
When the A/V connecting cable is used to output images, images are output with standard definition image quality (SD).
Tips
If you connect your camcorder to the TV using more than one type of cable to output images, the order of priority of the TV input jacks is as follows:
HDMI component S VIDEO video
HDMI
Using “BRAVIA” Sync
You can operate your camcorder with the Remote Commander of your TV by connecting your camcorder to a “BRAVIA” Sync compatible TV launched in 2008 or later with the HDMI cable.
HDMI cable
Connect your camcorder and a “BRAVIA” Sync compatible TV with the HDMI cable (sold separately).
Turn on your camcorder.
The TV input is switched automatically, and the image of your camcorder is displayed on the TV.
Contents of Table
Techniques Recording Useful
Index
54