On the remote
1Press BAND to select the band.
2Press TUNE + or – to set the frequency to the station you want.
3Press and hold the number button that you want to preset the new station on for 2 seconds.
If a station cannot be preset automatically
You need to preset a station with a weak signal manually. You can also label the preset station.
1Press RADIO BAND•AUTO PRESET to select the band.
2Tune in a station you want.
3Hold down DISPLAY•ENTER MEM for 2 seconds until the preset number flashes in the display.
4Press PRESET + or – until the preset number (1 to 10) you want for the station flashes in the display.
5Press DISPLAY•ENTER MEM.
6Input the name of the station (up to 8 characters). 1Select a character by pressing TEXT + or
2Press CURSOR t to make the cursor shift rightward.
Repeat steps 1 and 2.
You can also use the following buttons:
Button to use | Function |
|
|
CURSOR T, t | Move the cursor leftward or |
| rightward |
|
|
CHARACTER | Each time you press the button, the |
| character changes as follows: |
| Upper case letters t |
| Lower case letters t |
| Numbers and symbols. |
|
|
7Press DISPLAY•ENTER MEM.
Radio The
The Radio 15