Waking up to music (continued)

Tips

•To exit the standby mode, press STANDBY

to make the indication disappear.

•The preset settings remain until you reset them.

4 Set the timer to the hour and the minutes you want the music to go on.

1Press TUNE•TIME

SET + or – to set the hour and press

DISPLAY•ENTER MEM.

2Press TUNE•TIME SET + or – to set the minutes and press DISPLAY•ENTER MEM.

5 Press TUNE•TIME SET + or – to set the volume you want, and press DISPLAY•ENTER MEM.

6 Press STANDBY.

The indication lights up and the power goes off; the player enters the standby mode.

At the preset time, the power will go on and music will play. Then the power will go off after 1 hour, and the player will enter the standby mode again.

To check/change the waking up timer settings

Press TIMER, then DISPLAY•ENTER MEM. Each time you press DISPLAY•ENTER MEM, a stored setting is displayed in the set order. To change the setting, display the setting you want to change and re-enter it.

To use the player before a timer playback starts

If you turn on the player, you can use it as usual (in case of the radio, if you listen to the station which is different from the one you tuned in step 1 on page 21, you will hear that station at the preset time). Turn off the player before the preset time.

22The Timer