Labeling the preset stations
You can label each preset station with up to 11 characters.
Jog dial
DISPLAY | TUNE |
ENTER/
MEMORY
1 Select the station you want to label (see page 22).
2 Press and hold ENTER/MEMORY for about 2 seconds.
The preset number and the frequency flash.
3 Press ENTER/MEMORY. The cursor flashes.
4 Turn the jog dial to select a character to be used in the new station name.
5 Press TUNE + to move to the next character to be entered.
6 Repeat steps 4 and 5 until you finish entering the station name.
7 Press ENTER/MEMORY.
Tips
•In step 4 above, you can skip to the different types of characters by pressing DISPLAY. Each time you press the button, the indication skips as follows:
Alphabet (upper case) t Alphabet (lower case) t Numbers and marks t Blank space
•The characters you can use for labeling the stations are as follows:
–A to Z
–a to z
–0 to 9
–! " # $ % & ( ) * . ; < = > ? @ _ ' + – ’ , / :
–(space)
To change the station name
1Follow steps 1 to 3.
2Press TUNE + or – to select the character you want to change.
3Turn the jog dial to select a new character.
4Repeat steps 2 and 3 until you finish changing the name.
5Press ENTER/MEMORY.
Tips
•When you want to erase a character, enter a blank space instead of a character.
•Only a blank space between characters or before a character is recognized as a blank space.
•Even if you preset stations automatically again, station names will be retained for stations at the same frequency.
Radio The
23