The CD does not play.

Place the CD with the label surface up.

Clean the CD.

Take out the CD and leave the CD compartment open for about an hour to dry moisture condensation.

The sound drops out.

Reduce the volume.

Clean the CD, or replace it if the CD is badly damaged.

Place the player in a location free from vibration.

Clean the lens with a commercially available blower.

The sound may drop out or noise may be heard when using poor quality CD-Rs/CD- RWs or if there is a problem with the recording device or application software.

“No File” is displayed.

You are trying to play a CD-R/CD-RW that does not contain an ATRAC file or MP3 file. (page 4)

“Over” is displayed.

You cannot program more than 20 tracks on this player. (page 19)

Radio

The audio is weak or has poor quality.

Replace all the batteries with new ones if they are weak.

Move the player away from the TV.

The picture of your TV becomes unstable.

If you are listening to an FM program near the TV with an indoor antenna, move the player away from the TV.

Remote

The remote does not function.

Replace all the batteries in the remote with new ones if they are weak.

Make sure that you are pointing the remote at the remote sensor on the player.

Remove any obstacles in the path of the remote and the player.

Make sure the remote sensor is not exposed to strong light such as direct sunlight or fluorescent lamp light.

Move closer to the player when using the remote.

After trying the above remedies, if you still have problems, unplug the AC power cord and remove all the batteries. After all the indications in the display disappear, plug the power cord and insert the batteries again. If the problem persists, please consult your nearest Sony dealer.

31