Other functions

Changing the sound settings

Adjusting the sound characteristics

1Press the select button repeatedly until the desired item appears.

2Rotate the volume control dial to adjust the selected item.

After 3 seconds, the setting is complete and the display returns to normal play/reception mode.

The following items can be set (follow the page reference for details):

z” indicates the default settings.

EQ3

To select an equalizer type: “XPLOD” (z), “VOCAL,” “EDGE,” “CRUISE,” “SPACE,” “GRAVITY,” “CUSTOM” or “OFF.”

DSO

To select the DSO mode: “1,” “2” (z), “3” or “OFF.” The larger the number, the more enhanced the effect.

When tuner is selected as the source, the default setting is “OFF.”

LOW*1, MID*1, HI*1 (page 9)

To customize the equalizer curve.

BAL (Balance)

To adjust the balance between the right and left speakers: “RIGHT-10” – “CENTER” (z) – “LEFT-10”

FAD (Fader)

To adjust the balance between the front and rear speakers: “FRONT-10” – “CENTER” (z) – “REAR-10”

SUB (Subwoofer volume)

To adjust the subwoofer volume: “+10 dB” – “0 dB” (z) – “–10 dB”

(“ATT” is displayed at the lowest setting.)

AUX*2 (AUX level)

To adjust the volume level for each connected auxiliary equipment. This setting negates the need to adjust the volume level between sources (page 10).

Adjustable level: “+18 dB” – “0 dB” (z) – “–8 dB”

*1 When EQ3 is activated.

*2 When AUX source is activated.

Customizing the equalizer curve— EQ3

“CUSTOM” of EQ3 allows you to make your own equalizer settings.

1Select a source, then press the select button repeatedly to select “EQ3.”

2Rotate the volume control dial to select “CUSTOM.”3Press the select button repeatedly until “LOW,” “MID” or “HI” appears.4Rotate the volume control dial to adjust the selected item.

The volume level is adjustable in 1 dB steps, from –10 dB to +10 dB.

Repeat steps 3 and 4 to adjust the equalizer curve.

To restore the factory-set equalizer curve, press and hold the select button before the setting is complete.

After 3 seconds, the setting is complete and the display returns to normal play/reception mode.

Tip

Other equalizer types are also adjustable.

Adjusting setup items — SET

1Press and hold the select button.

The setup display appears.

2Press the select button repeatedly until the desired item appears.

3Rotate the volume control dial to select the setting (example “ON” or “OFF”).4Press and hold the select button.

The setup is complete and the display returns to normal play/reception mode.

Note

Displayed items will differ, depending on the source and setting.

The following items can be set (follow the page reference for details):

z” indicates the default settings.

continue to next page t

9