Sony Ericsson DVP-CX777ES manual Overview and Supported Features, Installation Overview

OneHome￿￿

￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿

DVD Integration Note

Manufacturer:	Sony
Model Number(s):	DVP-CX777ES
Comments:
Document Revision Date:	1/10/2006

OVERVIEW AND SUPPORTED FEATURES

The DVD players include an RS-232 connection which is used to connect to the OneHome system and provide communications, enabling reliable control of the DVD player.

IMPORTANT: This Integration Note covers the Sony DVD changer connected directly to the OneHome System. It is also possible to integrate the DVD changer through a DVD media server, such as the Escient DVDM-100: refer to the Integration Note for the compatible media server.

THESE DVD PLAYERS SUPPORT THE FOLLOWING FEATURES:

Basic Transport Control: Play, stop, etc.

Disc Selection: Select the desired disc.

DVD Information: The Viewer interface displays limited information about each DVD, using the Carrousel + Select interface template.

INSTALLATION OVERVIEW

1.During the rough-in phase install the necessary power and A/V cabling for the DVD player.

2.Also during the rough-in phase, run a Cat5 wire from the location of the DVD player back to the Network Assembly of the OneHome system to provide the serial connection needed to control the receiver. Refer to the RS-232 Connection Options Integration Note for other serial connection options.

3.Install the DVD player and other theater components.

4.Test the DVD player with the other theater components to ensure that the audio and video play correctly.

5.Connect the OneHome system to the DVD player electrically. See the connection diagram for more information.

6.Configure the OneHome system for the DVD player and confirm communication between the DVD player and the HomeBrick.

7.Test the system by playing a DVD with the various transport controls.

HomeLogic LLC ￿ 100 Hoods Lane ￿ Marblehead, MA 09145 ￿ Phone (781) 639-5155 ￿ Fax (781) 639-9677