SIM Card Errors

Wrong PIN/

You have entered your PIN or PIN2 incorrectly. Enter the correct

Wrong PIN2

PIN or PIN2, and click OK. See SIM lock on page 28.

 

 

Codes do not

When you want to change a security code (for example your PIN)

match

you have to confirm the new code by entering it again. This error

 

occurs when the two codes, that you have entered do not match.

 

See Phone lock on page 28.

 

 

PIN blocked/

You have entered your PIN or PIN2 incorrectly three times

PIN2 blocked

in succession. To unblock, see SIM lock on page 28.

 

 

PUK blocked –

You have entered your personal unblocking key code (PUK)

contact operator

incorrectly 10 times in succession. Contact your network operator

 

or service provider.

 

 

Error Codes

Windows® 98

Error 619:

An ISDN mode (V110 or V120) has been selected when creating

The port is

a connection, but is not supported by the network.

disconnected

Select Analogue mode when creating the connection in the

during dial-up

Connection Wizard.

 

 

Error 629:

Telephony settings are set to pulse dialling, change to tone dialling.

The port was

 

 

disconnected

Check the dialling settings for the current location (In Control

by the remote

Panel

Phone and Modem Option Dialling Rules

machine during

Location

Edit) and change the Dial using setting to tone,

dial-up

or (if Pulse is a necessity), create a new location called EDGE

 

Anywhere and set the dialling to Tone. EDGE anywhere location

 

should then be used whenever you use the EDGE PC Card.

 

 

Error 630:

A Dial-up networking connection is already connected.

The port was

Close the connected dial-up and try again.

disconnected

 

 

due to hardware

 

 

failure during

 

 

dial-up

 

 

 

 

Error 645:

Incorrect APN or CID selected for network.

Internal

Modify your Dial-up Connection, see Create a Connection on page

authentication

21 for more details. Make sure that the APN file contains the name

error during

of the access point your network operator is using. The Dialup Wizard

dial-up

should do this automatically, if you are experiencing problems contact

 

your network operator.

 

 

 

Troubleshooting43