When the phone rings, say “Busy”.
The call is rejected. The caller is diverted to voicemail, if activated, or hears a busy tone.
Editing your voice commandsYou can keep all your voice commands up to date by
}View & edit. Scroll to the relevant tab and edit your voice command.
To1} Settings } the General tab } Voice control
}Voice dialling } Edit names.2Select a voice command } More
}Replace voice.3Lift the phone to your ear, wait for the tone and say the command.
Calling
Tips when recording and using voice commandsIf your phone cannot detect speech, one of the following might have happened:
•You spoke too softly – try speaking louder.
•You held the phone too far away – hold it as you do during a call.
•The voice command was too short – it should be around one second long and more than one syllable.
•You spoke too late or too soon – speak immediately after the tone.
•You did not record the voice command when the handsfree was attached – for voice control with a handsfree kit, record when the handsfree is attached.
•You used another intonation – use the same intonation as you did when recording the voice command.
This is the Internet version of the user's guide. © Print only for private use. | 33 |