11
Installing to the Rack
gLINE A connectors
Line input connectors for Y/C separate, composite video and
audio signals and their loop-through output connectors.
Press the LINE A button to monitor the signal input through these
connectors.
If you input signals to both Y/C IN and VIDEO IN, the signal
input to the Y/C IN is selected.
Y/C IN/OUT (4-pin mini-DIN)
These are the input/output connectors for a Y/C separate signal.
Connect them to the Y/C separate input/output connectors on
equipment such as a VCR, video camera, or another monitor.
VIDEO IN/OUT (BNC)
These are the input/output connectors for a composite video
signal. Connect them to the composite video input/output
connectors on equipment such as a VCR, video camera, or
another monitor.
AUDIO IN/OUT (phono jack)
These are the input/output jacks for an audio signal. Connect
them to the audio input/output jacks on equipment such as a
VCR.
hAC IN socket
Connect the supplied AC power cord.
Installing to the Rack1Remove the screws (4) to remove the stand.
2Attach the mounting bracket, then attach the unit to the rack.
LINE ALINE BSDISCANASPECT
RESET
MENUVOLUMEPOWER
KEY
INHIBIT
ENTER
RGB/
COMPONENT
EXT
SYNC
BLUE
ONL
Y