9
Location and Function of Parts and Controls
mLINE A button
Press to monitor the signal through the LINE A input connector.
nSpeaker
The audio signal selected by the input select button (jSDI
button, kRGB/COMPONENT button, lHDMI button or
mLINE A button) on the front panel is output.
Input Signals and Adjustable/Setting Itemsa: Adjustable/can be set
×: Not adjustable/cannot be set
*1 When a component signal (480/60I) is input, this can be switchable.
*2 When a 480/60P or 576/50P signal is input, this can be switchable.
*3 When an interlace signal is input, this can be switchable.
*4 When BKM-320D is used, SDI signals can be input.
*5 When a 1080I signal is input, this cannot be switched.
(PIC DELAY MIN is set to “ON” only.)
*6 When a PC signal is input to the HDMI IN connector using a DVI conversion
cable, this can be adjusted.
Input signal
Item Video, Y/C B & W Component RGB SDI *4 HDMI
SD HD SD HD D1 SD HD DVI*6
CONTRAST aaaaaaaaaa
BRIGHT aaaaaaaaaa
CHROMA a×aa××aaa×
PHASE a
(NTSC) ×××××××××
APERTURE aaaa××aaa×
COLOR TEMP aaaaaaaaaa
COMP LEVEL*1 ××a
(480/60I) ×××××××
NTSC SETUP a
(NTSC)
a
(480/60I) ××××××××
GAMMA aaaaaaaaaa
SCAN aaaaaaaaa×
ASPECT aaaa
*2 aa
*2 aaa
*2 ×
MARKER aaaaaaaaa×
BLUE ONLY a×aaaaaaa×
PIC DELAY MIN *3 aaaa
*5 aa
*5 aaa
*5 ×
EXT SYNC ××aaaa××××