6Features
On Replacing the Parts
Note that if service personnel changes some parts during repair,
these parts may be retained.
FeaturesThe LMD-2030W (20-inch) is a multiple format LCD monitor for
broadcast/professional use featuring a precise image and high
performance. Supporting digital/analog main broadcast signals,
and HDMI1) input, it can be used under various lighting
conditions.
1) HDMI, the HDMI logo and High-Definition Multimedia Interface are
trademarks or registered trademarks of HDMI Licensing LLC.
High brightness LCD panel
Because of precise image, wide viewing angle technology and
high speed response, real color image can be reproduced.
Multi-format
The monitor supports the video, Y/C, RGB, component and
HDMI input signals.
SDI signals can be available when input adaptor BKM-320D
(optional) is used.
Both NTSC and PAL color systems are supported, and the
appropriate color system is selected automatically.
For more information, see “Video signal formats” (page22).
External sync input
When the EXT SYNC button is in the on position, the unit can be
operated on the sync signal supplied from an external sync
generator.
Automatic termination (connector with mark
only)
The input connector is terminated internally at 75 ohms when
nothing has been connected to the output connector. If a cable is
connected to the output connector, the internal terminal is
automatically released and the signals input to the input connector
are output to the output connector (loop-through).
External remote control function
You can directly select the input signal, aspect, etc., by operating
the equipment connected to the PARALLEL REMOTE
connector.
Monitor stand with tilt function
A monitor stand with tilt function is equipped for desk top use. It
shall be removed when mounted on the rack.
Rack mount
The monitor supports the VESA (100 × 100 mm) standard.
It can be mounted on an EIA standard 19-inch rack (using an
optional mounting bracket).
For more information, see “Installing to the Rack” (page11).
3-color tally lamp
The tally lamp lights in red, green or amber to monitor each input
picture and check the on-air mode.