Getting started
Assembly, SIM card, battery, turning on, help, calls
To remove the SIM card
1Turn off the phone. Remove the battery cover and battery.
2Push the SIM card in to release.
Assembly
Before you start using your phone, you need to insert a new SIM card and the battery.
SIM card and battery
To insert SIM card and battery
Battery
To charge the battery
≈ 2.5 h
1Turn off the phone. Remove the battery cover by sliding the battery release latch down.
2Slide the SIM card into its holder with the contacts facing up.
3Insert the battery with the label side up and the connectors facing each other.
4Slide the battery cover into place.
Do not connect the charger unless the battery is inserted.
1Connect the charger to the phone. Wait approximately 2.5 hours or until the battery icon indicates a full charge before removing the charger.
2Remove the charger plug by pulling up and out.
Some functions use more battery power than others and may require more frequent recharging. If talk time or standby time becomes noticeably shorter, replace the battery. Only use approved batteries from
Sony Ericsson % 75 Battery.
4Getting started
This is the Internet version of the user's guide. © Print only for private use.