Sony Ericsson T237, T237s 54

Using the WAP browser

To start browsing

• From standby, press and hold the key.

To reset your WAP Profile, do the following:

1.First select the WAP profile you want to use. Scroll to Web Services, YES, Options, YES, WAP Profiles, YES.

2.Then select one of the following:

•Open your homepage.

•Go to one of your bookmarks. Select Bookmarks, YES.

•Enter the address of a WAP site. Select Enter Address, YES, Add Address to enter a new WAP address or select one of the 10 latest entered addresses.

Tip: When you enter a WAP address, the normal http:// prefix is not needed.

To exit WAP and disconnect

•Press and hold NO or

•Press , select Exit.

Options when browsing

When you have started browsing, you can reach

different browsing options by pressing .

•Home – Go to the homepage set for the current WAP profile.

•Back – Go back to the previous page.

•Bookmarks – Add the site you are currently browsing to your list of bookmarks, or see the list of bookmarks for the current profile.

•Enter Address – Enter the WAP address of a site you want to visit.

•Save Picture – Save a picture from the site.

•SendAsTextMsg – Send a text message with a link to the current WAP page to another phone.

•Send Link – Send a link to the current site to another phone.

•Reload – Refresh the contents of the WAP page.

•Exit – Disconnect and go to standby.

•Status – Display current status information, for example, profile, access type, connection time, data rate, security, address.

•Set as Homepg – Set the current site as the homepage of the WAP profile you are using.

Note: If you select an email address when browsing a WAP site, you can reply with a text message.

Using Mobile Internet