Editing your voice commands
You can keep all your voice commands up to date by
To
1.Scroll to Settings, Voice Control, Voice Profiles, Edit Contact.
2.Select a voice command.
3.Select Replace Voice.
To listen to a recorded voice command, select Play Voice.
4.Lift the phone to your ear, wait for the tone and say the command.
You can also edit the voice command for a contact name in Edit Contact in the Phonebook menu.
Tips when recording and using voice commands If your phone cannot detect speech, one of the
following might have happened:
•You spoke too softly – try speaking more loudly.
•You held the phone too far away – hold it as you do during a call.
•The voice command was too short – it should be around one second long and more than one syllable.
•You spoke too late or too soon – speak immediately after the tone.
•You did not record the voice command when the handsfree was attached – for voice control with a handsfree kit, record when the handsfree is attached.
•You used another intonation – use the same intonation as you did when recording the voice command.
Voicemail
Callers can leave a voicemail message when you cannot answer a call.
Receiving a voicemail message
Depending on your network operator, you are informed that someone has left a message by a text message or by a voicemail indication. Press Yes to listen to the message.
Calling your voicemail service
You can easily call your voicemail service by pressing
and holding 
, if you have saved your voicemail number in the phone. You get the number from your service provider.
•To enter the number, scroll to Messages, Options, Voicemail Number.
Calling 35
This is the Internet version of the user's guide. © Print only for private use.