Calling
To
1} Settings } General } Voice control
}Voice dialling } Edit names.
2Select a voice command, press More
}Replace voice.
3Lift the phone to your ear, wait for the tone and say the command.
Tips when recording and using voice commands If your phone cannot detect speech, one of the following might have happened:
•You spoke too softly – try speaking louder.
•You held the phone too far away – hold it as you do during a call.
•The voice command was too short – it should be around one second long and more than one syllable.
•You spoke too late or too soon – speak immediately after the tone.
•You did not record the voice command when the handsfree was attached – for voice control with a handsfree kit, record when the handsfree is attached.
•You used another intonation – use the same intonation as you did when recording the voice command.
Diverting calls If you cannot answer incoming voice calls, you can divert them to another number, for example, your answering service.
When the Restrict calls function is activated, some Divert calls options are not available.
You can choose between the following divert options:
•Divert always – divert all voice calls.
•When busy – divert calls if you are already on the phone.
•Not reachable – divert calls if your phone is turned off or if you are unreachable.
•No reply – divert calls that you do not answer within a specified time limit
To activate a call divert
1} Settings } Calls } Divert calls.
2Select a call type and then one of the divert options and select Activate.
3Enter the phone number to which you want your calls to be diverted, or press Look up to find the
contact in your phonebook, OK.
30
This is the Internet version of the user's guide. © Print only for private use.