4.Select the setting you want to edit, YES. Edit the setting, YES.
5.Repeat step 4 for other settings you want to edit.
Preferred service
You can set GPRS or GSM as the preferred service.
Note: To see the status of GPRS coverage and connection, in standby, look at the triangle above the signal strength indicator. If the triangle is filled GPRS is available, otherwise it is not.
To select preferred mode
Scroll to Connectivity, YES, Data comm., YES, Pref. service, YES, and select GPRS and GSM or GSM only.
WAP profile settings
The WAP settings are stored in a WAP profile. In most cases you only need to use one profile to access the Internet.
You set up and use additional WAP profiles, for example, when accessing secure Internet sites, such as a banking site or a corporate intranet. You then simply switch between profiles when you need to change the network connection.
To enter WAP profile settings manually
1.Make sure you have a data account set up between your phone and the Internet server, as described in “Data account settings” on page 47.
2.Scroll to WAP services, YES, Options, YES, WAP profiles, YES.
3.Select Add profile? to add a new profile or select an existing profile that you want to edit, YES.
To enter information in a new profile
When selecting Add profile? enter a name for the profile, YES, Connect using:, YES, select the data account to be used, YES and enter the IP address:, YES. A list appears. Scroll to Save?, YES.
To edit an existing profile
When selecting an existing profile, you can do the following:
•Rename – Change the name of the profile.
•Connect using – Select data account.
•IP address – WAP gateway server address.
•Advanced – More profile settings, see below.
•Delete – Remove the profile.
Setting up WAP 49
This is the Internet version of the user's guide. © Print only for private use.