Calling

To activate voice answering and record voice answer commands1} Settings } the General tab } Voice Control } Voice Answer } Activate.

2Instructions appear. } Continue and lift the phone to your ear. Wait for the tone and say “Answer”, or another word. If the recording sounds ok } Yes. If not } No and repeat step 2.

3Say “Busy”, or another word } Yes.

4Instructions appear. } Continue and select the environments in which you want voice answering to be activated. You can select several alternatives.

To answer a call using voice commands

When the phone rings, say “Answer” and the call is connected.

To reject a call using voice commands

When the phone rings, say “Busy”.

The call is rejected. The caller is forwarded to voicemail, if activated, or hears a busy tone.

Editing your voice commands

You can keep all your voice commands up to date by re-recording them or deleting the ones you do not use. You can also edit a voice command for a phone number in the phonebook. Select the contact you want to edit a voice command for } More

}View & edit. Scroll to the relevant tab and edit your voice command.

To re-record a voice command1} Settings } the General tab } Voice Control } Voice Dialing } Edit Names.

2Select a voice command } More

} Replace Voice.

3Lift the phone to your ear, wait for the tone and say the command.

Tips when recording and using voice commands

If your phone cannot detect speech, one of the following might have happened:

You spoke too softly – try speaking louder.

You held the phone too far away – hold it as you do during a call.

32This is the Internet version of the user's guide. © Print only for private use.