Sound Performance Lab 2376 owner manual Packing list, Adapter plate

Packing list

•24/96 AD Converter Module

•Two each M3 screws, nuts and washers

•Adapter plate

•Manual

General instructions/adapter plate Installation

The SPL AD Converter Module Model 2376 (falsch in deut- schem Text) is designed strictly as an option for compa- tible SPL devices. If you are not a technician or do not have sufficient experience with electronic repairs or modifica- tions, we highly recommend that you ask a technician or your SPL dealer for assistance.

•Before installing the module, discharge any static elec- tricity by deactivating the ground lift switch on the rear panel of the respective SPL device and touching the unit‘s casing.

•Disconnect the power cable as well as any other cables from the SPL unit.

•Handle the converter module with care, avoiding contact with the components. Hold the module by the panel or the edges of the circuit board only. Do not use force or exert excess pressure when connecting the module to the device.

Adapter plate

Most converter-ready SPL devices are designed to accept one of two various converter modules. The 2376 is the smaller of the two, so that in most cases it must be attached to the adapter plate using the included M3 screws, washers and nuts before it can be mounted in the rear-panel option slot on the SPL device.

24/96 AD Converter 2376 5