Sound Performance Lab 2718 manual Control Elements, Signal LED, Overload LED, ON, LED Display

Control Elements ON, LED Display

		0 9 3		" / (
		7			&3
		
						0
		* (
						-
	4					7
			L
°
		L
°
		L

°	
°
	
°
	
°
	
°
	
°
	065165
	0/					2
					&
				&
			*7
		4
	1"4

ON

With the ON button you can turn the device on or off. The ON button is illuminated when the device is active.

Relay hard bypass circuits ensure signals to be directly switched from input to output in the case power failures – this “Power Fail Safety“ feature guarantees signal flow in any situation.

Signal LED

The SIG. LED indicates that an audio signal reaches the input with a level above -20 dB. This LED helps the operator especially in complex setups to determine immediately whether the Vox Ranger actually receives any signal.

Overload LED

The OVL LED indicates a potential internal overload. It begins indicat- ing approximately 3 dB ahead of any expected overload to leave head- room for peak levels.

Overloads must be avoided to exclude audible distortions. The gaining is still perfect in most cases when the OVL LED is illuminating shortly since there’s still a headroom of 3 dB for peak levels.

Permanent illumination of the OVL LED indicates overloads with pos- sible audible distortions. Reduce the OUTPUT Gain control if the OVL LED illuminates permanently until the OVL LED goes out or flashes shortly.

10 RackPack: Vox Ranger