XLR Sockets, Transformers, Channel Split Rear Panel/Connections
The Vox Ranger is fitted with one XLR input and two XLR outputs for balanced operation.
Pin-wiring of all XLR sockets:
Pin 1 = GND, Pin 2 = hot (+), Pin 3 = cold (-)
Discrete balancing stages for both in- and output provide high common mode rejection and are capable of driving long cables (depending on the capacity of the cables and the following input balancing stages).
The illustration shows the correct
Lundahl I/O Transformers
The Input and Output 1 stages may be
*OQVU0VUQVU
CBMBODFE | VOCBMBODFE | CBMBODFE | VOCBMBODFE | ||||||||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
(/% IPU DPME
Channel Split
The channel split option through Output 2 always provides alterna- tives in processing or routing of the input channel. While one output may be used directly for mixing, the second output can be routed in any other
RackPack: Vox Ranger | 9 |