Sound Performance Lab 9530 manual Foreword Thanks Operation safety, Tube Vitalizer, Hermann Gier

Models: 9530

1 20
Download 20 pages 43.18 Kb
Page 4
Image 4
Foreword

Foreword

Thanks

Operation safety

4

Dear Customer,

Thank you for the confidence you have shown towards SPL electronics GmbH by purchasing the SPL Tube Vitalizer. You have decided to use a tool of high performance which sets you in the position to have faster success and a better sound quality in your music productions and pre-masterings.

As a typical SPL unit the Tube Vitalizer combines exemplary specifications and high manufacturing standard with excellent sound quality to provide you a precious component for studio and mastering purposes. Please read this manual carefully to ensure you have all the information you need to use it.

We wish you every success with the Tube Vitalizer.

Your Sound Performance Laboratory-Team

I would like to start with my thanks to all our staff, who created what is to be described here. The importance of their exceptional qualification and talents cannot be overestimated. But the biggest thanks I owe their unbelievable engagement, creativity and productivity in realizing our projects.

Our products are often tested and compared in many publica- tions and by our customers themselfs and constantly valued with best results. I would like to pass on this broad appreciation to those, who deserve it – my excellent colleagues.

Hermann Gier

The housing of the Tube Vitalizer has the standard 19" EIA format and occupies 2U (88 mm) in your rack.

The Tube Vitalizer should not be installed near units which produce strong magnetic fields or extreme heat. Do not install the Tube Vitalizer directly above or below power amplifiers or digital processors. If possible, the Tube Vitalizer should be placed in an “analog rack”. This eliminates problems which could result from interfering high-frequency signals such as clock frequen- cies, MIDI or SMPTE signals.

Check that the voltage details quoted on the back panel are the same as your local mains electricity supply. Use a minus (-) screwdriver to set the voltage selector to the voltage for the area in which the unit will be used. Never cover up the ventilation slots on the top of the unit. If, during operation, the sound is inter- rupted or indicators no longer illuminate, or if abnormal odor or smoke is detected, or if liquids are spilled on the unit, immedia- tely disconnect the power cord plug and contact your dealer.

Only clean your Tube Vitalizer with a soft, lint-free cloth.

TUBE VITALIZER

Page 4
Image 4
Sound Performance Lab 9530 manual Foreword Thanks Operation safety, Tube Vitalizer, Your Sound Performance Laboratory-Team