Loading a disc
1.Turn the power on.
2.Press the EJECT button on the panel to flip it down. Insert the disc with the printed side facing upward into the slot. Press EJECT button on the panel to eject the disc. The panel will be closed automatically.
3.Playback will start automatically.
Inserting the SD/MMC card/USB device
Insert the MMC/ SD card or USB device into MMC/SD compartment or USB socket (When you want to insert a Card, you need to tilt the front panel to an appropriate degree). Then the playing mode will be changed into MMC/SD or USB mode automatically. The first card/USB device track playback will start.
When you want to pull out the Card, firstly push it, and then pull it out.
Note: When MMC/SD card and USB device are both inserted into their compartment or socket, the playing mode will be changed into the mode of the later one.
Playing/pausing
When the disc/card/USB device has been already loaded the playback of the first track starts automatically. To ensure good system performance, wait until the unit finishes reading the disc information before proceeding.
OR press the PLAY/PAUSE button to start playback. Press it again to pause the playback. Press again to resume the playback.
Stop playback
During disc playing, press the STOP button on the RC. Playback will be stopped. If the PLAY/PAUSE button is pressed, playback will start from the position at which it was stopped. If the disc is removed, the resume function is cancelled.
Press the STOP button twice to finally stop the playback, press the PLAY/PAUSE button to start playback from the beginning of the first track.
Playing the previous/next track
During playback press the UP/DN buttons on the panel or the / on the RC to select the next or previous track to play.
Note: press the UP/DN or / button multiple times to advance multiple tracks forward or backward.
Using the digit buttons
To input any number use the buttons with digits.
During disc playing, press one of the 1~9 and 0/10 number buttons to select and play the
If you want to play the track that number is bigger than 10, use the 10+, 1~9 and 0/10 button. For example, to play
19
