7
Using the ISO Connector
1. If your car is equipped with the ISO connector, then connect the ISO connectors as
illustrated.
2. For connections without the ISO connectors, check the wiring in the vehicle
carefully before connecting, incorrect connecti on may cause serious damage to this
unit.
3. Cut the connector, connect the colored leads of the power cord to the car battery
as shown in the color code table below for speaker and power cable connections.
Function
Connector A Connector B
1 7 Rear Right (+)---Violet
2 8 Rear Right (-)---Violet/Black Stripe
3 9 Front Right (+)---Gray
4Battery 12V (+)/yellow 10 Front Right (-)---Gray/Black Stripe
5Auto Antenna/blue 11 Front Left (+)---White
612 Front Left ((-)---White/Black Stripe
7ACC+/red 13 Rear Left (+)---Green
8Ground/black 14 Rear Left (-)---Green/Black Stripe