Soundstream Technologies 404s owner manual Key to Callouts, Sample System #1

SAMPLE SYSTEM #1

4 channels of input

4 channels of full range output

Key to Callouts

1.Fault LED - Indicates a blown fuse.

2.High Power LED - Indicates amplifier power on in "High Power" mode.

3.Auto High Current™ LED - Indicates amplifier power on in "High Current" mode.

4.+12V - Connected to a fuse or circuit breaker, then to the battery's positive post.

5.GND - Main ground connection. Bolt to a clean chassis ground in the vehicle.

6.REM - Remote turn-on input from the head unit. Accepts +12V.

7.Speaker Output Connections - Channels 1 & 2.

8.Input Level - Channels 1 & 2 independent input level controls.

9.Inputs - Channels 1 & 2 RCA inputs.

10.Speaker Output Connections - Channels 3 & 4.

11.Input Level - Channels 3 & 4 independent input level controls.

12.Inputs - Channels 3 & 4 RCA inputs.

13.Main Fuse - Main power supply fuse. Replace only with the same value fuse.

14.Coherent Stereo™/Bridge Mono / Mixed Mono Switch -

Channels 1 & 2; Select "Bridge" for bridged mono operation (use right channel input). Select "Stereo" for coherent stereo operation. Select "Mixed Mono" for simultaneous stereo / bridged mono operation.

15. Channels 3 & 4 Input Select - Selectable inputs from internal (from channels 1 & 2) or external (from channels 3 & 4 local RCA inputs).

16.Coherent Stereo™/Bridge Mono / Mixed Mono Switch -

Channels 3 & 4; Select "Bridge" for bridged mono operation (use right channel input). Select "Stereo" for coherent stereo operation. Select "Mixed Mono" for simultaneous stereo / bridged mono operation.

14 7