Adjusting the Para-Bass Controls
The bass response in a system is affected by four factors:
(1)The acoustics of the vehicle
(2)The locations of the speakers (3)The music material
(4)Speakers and speaker enclosures.
Because of the variations in the recording process, we developed
The Sweep control allows you to select a center frequency ( the frequency most affected) between 27 and 63 Hz. The Width control then allows you to control the shape of the filter centered around the Sweep frequency.
Setting The Output Voltage
The
different Bass Output selections. If you should need to change the settings, Please use the chart below for guidance. It is recommended : listen to the factory setting before changing your Bass Output settings.
Recommended Settings |
| |
Setting | Amplifier Input Voltage | Minimum Speaker Size |
2.5Volt | 3Volt or less | 8 |
5Volt | 5Volt or less | 10 |
7.5Volt | 7.5Volt or less | 12 |
10Volt | Oh My Gosh !!!!!!!!!!!!!!!!! |
|
Specifications
Maximum Input Level | 15 V rms |
Maximum Output Level | 13.5V peak |
Frequency Response | 10Hz - 100KHz ; |
Total Harmonic Distortion | 0.003% |
Signal to Noise Ratio | |
Balanced Input Noise Rejection | >60dB |
Input Impedance | 10 Kohm |
Output Impedance | 150 Ohms |
Power Supply | High headroom PWM |
Power draw | 150mA |
Recommend fuse rating | 1 Amp |
- 5 -