1/4” | Turn Clockwise to Lock |
screw |
Flush mount cup
Mounting surface
FIGURE 1 | Spring |
|
clip | FIGURE 2 |
Surface Mounting:
1)Drill one 5/16" diameter hole for the tweeter lead wires and two pilot holes for the mounting screws.
2)Attach the surface mount plate with two flat head screws.
3)Pass the lead wires through the hole. See figure 3.
4)Engage the locking holes on the back of the tweeter onto the tabs on the plate and rotate
Turn
FIGURE 3
FIGURE 4
5
40.pub | Friday, September 10, 1999 21:04 |
page 5 |
|
