Soundstream Technologies SPL40 TWEETER Tweeter Attenuation, FIGURE WIRING SPL 4 Wiring Diagram

TWEETER Tweeter Attenuation

The SPL 40 system has been designed to provide LEVEL optimum sound in a variety of installation locations. The CONTROL provided crossover allows for 2 positions of tweeter level control, 0dB and -3dB. A switch under the plastic crossover cover sets one of the two positions. The

factory setting is 0 dB.

Tweeter Level

Control Switch

FIGURE 5

WIRING SPL 4 Wiring Diagram

Figure 6 shows a diagram illustrating the wiring of the SPL 40 Component Speaker System. It is important to make sure that all connections are in phase; that is positive (+) is connected to positive (+), and negative (-) is connected to negative (-) since an out-of-phase connection will cause a dislocated image and low bass output. We suggest using premium cable. The connectors provided with this system will accommodate wire from 12 gauge to 16 gauge.

Head Unit

Amplifier

SPL 4X

Crossover

SPL 1 Tweeter

SPL 4 Woofer

FIGURE 6

7

40.pub	Friday, September 10, 1999 21:04
page 7