Soundstream Technologies Wireless Subwoofer Volume Control System Service, Table of Contents

ADVANCED OPERATION

Each button on the AIRBASS transmitter has a special "second" function which it can perform when it is held down for 2 seconds. The table below describes all the functions each button does.

BUTTON	Time Duration	Function
é	Depressed Momentarily	Volume Up
é	Held down for 2 seconds	Maximum Output Level
ê	Depressed Momentarily	Volume Down
ê	Held down for 2 seconds	Mute
M	Depressed Momentarily	Jump to the pre-programmed
		Maximum (or MEMORY) level*
M	Held down for 2 seconds	Program the current output
		level as the MEMORY level*
X	Depressed Momentarily	Mute
X	Held down for 2 seconds	Jump to the output level prior to
		"X" being pressed momentarily

∗The "M" button is factory pre-programmed for the "Maximum amplifier output level", which is set by the gain controls on the amplifier. It is possible to change the pre-programmed "M" button to a different level. The AIRBASS attenuation "ladder" is composed of eight "rungs" or levels. (See the diagram on page 7.) Any one of the "rungs" can be programmed as the MEMORY level. To program the MEMORY level to the "M" button, simply set the desired output level using the é and ê arrows. Once the level to be programmed has been found, simply hold down the "M" button for 2 seconds. The red LED on the transmitter will begin to flash, telling you the "second" function for that button has been sent. The MEMORY level has now been set. To use the MEMORY level, depress the "M" button momentarily, and AIRBASS will immediately go to that level.

SERVICE

Your Soundstream REFERENCE AIRBASS is protected by a limited warranty. Please read the enclosed warranty card.

TABLE OF CONTENTS
Design Features	4
AIRBASS Transmitter and Receiver Board	5
Installation	6
Basic Operation (All you need to know!)	7
Multiple Amplifier Applications	8
Multiple Car Applications	9
Advanced Operation (Really trick things you can do!)	10
Service	10
Troubleshooting	11
Specifications	11

10 3