MULTIPLE RECEIVER BOARD INSTALLATIONS

For installations using multiple Reference amplifiers to drive multiple subwoofers, it may be desired to have one AIRBASS hand-held transmitter control all the subwoofer amplifiers at the same time. This is very easy to do, but the programming procedure will require the amplifier to be powered up with the bottom plate off. To program multiple receiver boards to one transmitter, please complete the following steps:

1.Remove the bottom plate of the amplifier, and install the AIRBASS receiver board.

2.Connect power, ground and remote wires to the amplifier, and turn the amplifier on.

3.If the receiver board has never been programmed to a transmitter, the LED on the receiver board should be FLASHING FAST RED (on and off quickly). If the receiver board has already been programmed to a transmitter, the LED on the receiver board will PULSE RED (on for a quick pulse, then off for about a second). Press and hold the blue button on the receiver board for 4 seconds. While depressing the blue button, the LED on the receiver board should light up STEADY RED. After about 4 seconds, the LED will begin FLASHING FAST RED, indicating that the transmitter codes have been cleared, and it is ready to be programmed to a new transmitter.

4.Depress any button on the transmitter which you wish to use to control the AIRBASS receiver board. The LED on the receiver board will light up STEADY RED for about a second, then revert to a PULSING RED. This means the transmitter codes have been accepted and stored.

5.Re-assemble the amplifier.

REMEMBER: For the best range with more than one AIRBASS units in one car, place the antennas for each AIRBASS receiver board as far apart as possible.

KEY TO CALLOUTS

1.Transmitter - Portable hand-held remote controller.

2.Shift Key - The AIRBASS can control up to four receiver boards independently. Use the Shift Key to determine which board the transmitter is controlling.

3.Arrow Up Button - Press to increase bass level.

4.LED - Dual color red / green LED displays remote controller functions.

5.Arrow Down Button - Press to decrease bass level.

6."M" Button - Press this button to get MAXIMUM BASS.

7."X" Button - Press this to mute the amplifier.

8.Receiver Board - Amplifier-mounted receiver circuit board.

9.Programming Button - Use this button to program the receiver board to a transmitter.

10.Connector - Use the 5-pin ribbon cable to connect the receiver board to the amplifier's main pc board.

11.LED - Red LED which displays the receiver board status.

8

5

Page 4 Page 6
Page 5
Image 5
Soundstream Technologies Wireless Subwoofer Volume Control System Multiple Receiver Board Installations, KEY to Callouts
Page 4 Page 6

Wireless Subwoofer Volume Control System specifications

Soundstream Technologies has made significant strides in enhancing automotive audio systems with its innovative Wireless Subwoofer Volume Control System. This advanced system is designed to provide an effortless and dynamic way to manage subwoofer output, allowing users to fine-tune their audio experience while driving.

One of the main features of the Soundstream Wireless Subwoofer Volume Control System is its intuitive wireless operation. Users no longer need to deal with complicated wiring or manual adjustments. The system operates using a remote control that allows for easy volume adjustments from anywhere in the vehicle. This feature is beneficial during travel as it enables drivers and passengers to personalize their sound experience without distractions.

The Wireless Subwoofer Volume Control System also employs cutting-edge digital signal processing (DSP) technology. This ensures that sound quality remains pristine, delivering rich bass tones without distortion. By utilizing DSP, users can enjoy enhanced audio clarity, enabling them to hear their favorite music exactly as the artists intended.

Another notable characteristic of this system is its compatibility with a wide range of subwoofers, making it a versatile addition to any car audio setup. Whether you have a single subwoofer or a complex multi-subwoofer arrangement, Soundstream's technology allows for seamless integration, providing flexibility in crafting the perfect sound environment.

The design of the volume control unit is sleek and modern, complementing the aesthetics of contemporary car interiors. It features a simple interface with clearly labeled controls, ensuring that users can make quick adjustments without confusion. Additionally, the compact design allows it to fit discreetly within any vehicle layout.

Durability is also a key consideration in the design of the Soundstream Wireless Subwoofer Volume Control System. Constructed from high-quality materials, it can withstand the rigors of daily use while preserving functionality. Moreover, the system is designed to work effectively in various temperatures and operating conditions, ensuring long-term reliability.

In summary, the Soundstream Technologies Wireless Subwoofer Volume Control System stands out in the automotive audio landscape with its wireless functionality, DSP technology, versatile compatibility, sleek design, and durability. This innovative solution provides users with an unparalleled audio experience, allowing them to enjoy rich, powerful bass while maintaining convenience and ease of use.
Top Page Image Contents