![Louvre Kit - Black](/images/new-backgrounds/49674/496741x1.webp)
Louvre Kit - Black
Installation Instructions
Models: DV4136LK
The DV4136LK louvre kit is designed for use on fireplace model DVB4136 (Item number GF__R6J2) DVA4136 (Item number GFYN5J0).
Check Carton Contents
Compare shipping carton contents in Figure 1 with actual parts received for the model trim kit purchased. If any parts are missing or damaged, contact your dealer before starting installation.
Contents
Installation Instructions Hood
Bottom Louvre Assembly Top Louvre Assembly
Bolt Bag: 5 screws, 2 pivot brackets, 2 clevis pins, 2 clips
Hood
Bottom
Louvre
Top Louvre
Screws Pivot Brackets
Clip Pin
Clevis Pins | CAR229 |
|
Fig. 1 Carton contents.
Installation Instructions
1.Install the hood to the fireplace with three (3) screws provided. Align the slots on the hood with the holes in the top opening of the fireplace and secure with screws. (Fig. 2)
Outer Top
Front
Cold Air Box
(3)#8 x 1/2 Sheet Metal Screws Hood
KT1022
Fig. 2 Install hood.
2. Remove the top lou- |
|
|
| |
vre assembly from |
|
| 1 | |
carton and install |
|
| ||
|
|
| ||
in the top opening |
|
|
| |
of the fireplace just |
| 2 | Louvre | |
below the newly |
|
| ||
|
|
| ||
installed hood. The |
|
|
| |
hook of the louvre |
|
|
| |
fits into the brackets |
|
| Glass Panel | |
as shown in Figure |
|
| ||
|
| FP1854 | ||
3. | Fig. 3 | Install louvre. | ||
3. Install the two (2) | ||||
|
|
| ||
pivot brackets to the bottom of the fireplace and | ||||
secure with screws provided. (Fig. 4) |
|
Basepan Front
Tab
FP1855
Fig. 4 Place pivot brackets into basepan slot.
4.Install bottom louvre to pivot brackets using the clevis pins provided. Slide the clip pins through the holes in the clevis pins. (Fig. 5)
Installation complete.
Install bottom louvre into brackets, se- cure with clevis pin
Install clip pins through clevis pin
KT1024
Fig. 5 Install bottom louvre.
20014177 6/08 Rev. 1