Source Technologies, LLC ST9612 Secure MICR Printer User’s Guide
30
The PJL commands to unlock the fonts must precede all PCL commands. The re-lock
PJL commands must follow the PCL commands and final form feed command. The PCL
commands can print an unlimited number of pages between the unlock and re-lock
sequences. The following examples will use <ESC> to indicate the Escape character,
ASCII 27. Values shown in parentheses () are hexadecimal.
PJL Unlock Sequence
<ESC>%-12345X@PJL LDECLARE LRESOURCE:”flash:” LRWLOCK=”PASSWORD”
(0D)(0A)@PJL ENTER LANGUAGE=PCL(0A)
The sequence contains a UEL (Universal Exit Language) command followed by the
unlock and enter language commands. These commands are case sensitive.
PASSWORD is the initial default password value. The command delimiter is a Line Feed
(hex 0A) with Carriage Return (hex 0D) being optional. Spaces are required as shown.
The ENTER LANGUAGE command is optional but recommended. The command should
also end with a LF (hex 0A). At this time all secured resources including any resources
that are customer unique in Flash are unlocked and available to PCL.
The password value is limited to no more than 8 alphanumeric, case-sensitive
characters.
PJL Re-Lock Sequence
<ESC>%-12345X@PJL LDELETEPASSWORD LRESOURCE:”flash:”(0D)(0A)
<ESC>%-12345X
This sequence re-locks the resources with no change in the password value. The PJL
syntax of LDELETEPASSWORD is not the password. The command sequence
terminates with the UEL command (Universal Exit Language). This is optional but
recommended.
PJL Re-Lock Sequence With A New Password Value
<ESC>%-12345X@PJL DEFAULT LRESOURCE:”flash:” LRWLOCK=”xxxxxxxx”
(0D)(0A)<ESC>%-12345X
This command requires the resources to be previously unlocked. The new password is
represented by the value xxxxxxxx. The UEL is again optional but recommended.
After consulting Lexmark Technical Reference materials you may wish to expand the
PJL sequences to include more than the examples above. To chain multiple PJL
commands, follow the following format:
(UEL)(PJL COMMAND)(0A)(PJL COMMAND)(0A)(PJL COMMAND)(0A)(UEL or
ENTER LANGUAGE)
The normal printer action to any format problems or missing or extra symbols is to ignore
the PJL command. This may make it difficult to troubleshoot format errors.
PCL Font Call Commands
After PJL has unlocked the MICR Flash resources, the ST9612 uses standard PCL5e
commands to print. The five resident Source Technologies MICR font resources are all
MICR Commands | 7