Source Technologies ST9612 , Installing the Driver

Source Technologies, LLC ST9612 Secure MICR Printer User’s Guide

Installing the Driver

Note: Do not connect the printer at this time.

1. From the Source Tech Driver folder, double-click the driver installation

program.

Note: The name of the driver’s .exe program will vary depending on the

operating system being used. There will only be one executable file

included with the driver.

2. Click Next >.

3. Click I accept the terms, and then click Next >.

Printer and Driver Installation | 1

Contents

Main Secure MICR Printer Users Guide Copyright Notice Revision: A Table of Contents Page 1. Printer and Driver Installation Driver Overview Downloading the Universal Driver Unzipping the Driver Installing the Driver Page Page Page Page Page Configure the Driver to enable MICR Mode Configure the Driver to Recognize the Printer Secure Fonts Configure another driver to print without MICR toner Page Page Selecting the Printer Page 2. MICR Overview The Check Clearing System MICR Printing Standards in the United States Today Page 3. MICR Check Design General Features of Check Design Position and Dimension Gauge Design Elements in Detail Data Elements Page Page Page 4. Quality Issues Printer Features MICR Toner MICR Check Stock 5. Security Issues Page 6. MICR Features Secure MICR MICR Fonts Secure Fonts MicroPrint Resource Storage MICR Toner Cartridge PJL Unlock Sequence PJL Re-Lock Sequence PJL Re-Lock Sequence With A New Password Value PCL Font Call Commands Page PJL INFO MICR COMMAND Page Toner Cartridge and Photoconductor Units Toner Low Toner Out Photoconductor Unit Life Warning Replace Photoconductor (printer hard stop) Load MICR Toner Page PJL and PCL commands used to print the sample check: Appendix B: Secure Numeric Font Mapping Appendix B continued: Secure Numeric Font Mapping Page Appendix E: