Southbend BGLM-30 specifications Standard Features, Standard CONSTRUCTION SPECIFICATIONS

Gas Tilting Skillet

with Manual Tilt

Standard Features

-One-piece, 10-gauge, stainless-steel pan with coved corners and polished interior

-30-gallon (114-litre) or 40-gallon (152-litre) pan capacity

-Angled front for easy pouring

-5/8" (16mm) thick stainless-steel clad plate for even heat transfer over entire cooking surface

-Spring-assisted hinged stainless-steel cover with handle

-No-drip condensate guide

-Removable pour strainer

-Manual tilt with hand crank for complete emptying of pan

-Permanently lubricated, self-contained, gearbox tilt mechanism

-Integrally mounted controls: thermostat with power switch, ignition indicator light, heating indicator light

-100-450°F (38-232°C) temperature range

-Three-trial, direct spark ignition

-Tilt of more than 5° shuts-off burners

-High-temperature safety cut-off

-Narrow footprint: 36" (914mm) for model BGLM-30, 48" (1219mm) for model BGLM-40

-Welded stainless-steel tubular legs with bullet feet on front legs and flanged adjustable feet on back legs

-100,000 BTU (BGLM-30) or 125,000 BTU (BGLM-40) rating

-Warranty one year parts and labor

BGLM-30 (30 gallon)

BGLM-40 (40 gallon)

Model BGLM-30

Job

Item#

Standard CONSTRUCTION SPECIFICATIONS

Exterior Finish: #4 finish stainless steel.

Skillet Pan: One-piece, coved-corner, 10-gauge stainless steel with polished interior. Angled front for easy pouring and narrow footprint. 5/8" (16mm) thick stainless-steel clad plate. Spring-assisted hinged stainless-steel cover with handle.

Tilting Mechanism: Manual with hand crank. Permanently lubricated gear box. Sufficient tilt to empty pan completely.

Heat Controls: Thermostat with integral power switch and

heat range of 100-450°F (38-232°C). Ignition-indicator light and burners-are-on indicator light. Tilt switch shuts off burners when pan is tilted more than 5°. High-temperature cut-off at 500°F (260°C).

Base and Legs: Stainless steel with all-welded 1-5/8" (41mm) stainless-steel pipe frame with adjustable bullet feet and rear legs with adjustable flanged feet for bolting to floor.

Form BGLM Rev 0 (05/07) www.yatesgd.com www.yatesgraphicdesign.com Printed in USA