DIRECT STEAM
2/3 JACKETED KETTLE
STATIONARY OR TILTING
SPECIFICATIONS:
Shall be a Model ___________________________________,
steam jacketed kettle. Kettle shall be of stainless steel, mounted in enclosed cabinet base. A double wall kettle interior shall form a steam jacket around the lower 2/3 of the kettle. The bottom of the kettle shall be of hemispherical design for superior heat circulation. Steam control and hot and cold water fill faucet shall be mounted on stainless steel counter top. Kettle shall be equipped with 2" (50 mm) sanitary draw off, shall be enclosed for sanitary purposes. Steam trap is standard. Swing drain for draw off shall be removable without tools and shall be equipped with removable strainer.
Note: Tilting may be stopped at any time without kettle tilting back. Pan support shall hold one 12" x 20" pan (305mm x 508mm) pan.
MODEL | CAPACITY |
|
|
(Tilting Type) 30 Gal. | 114 | Liter | |
|
|
| |
(Tilting Type) 40 Gal. | 152 Liter | ||
(Tilting Type) 60 Gal. | 227 | Liter | |
(Stationary) 20 Gal. | 76 Liter | ||
|
|
|
|
(Stationary) 30 Gal. | 114 | Liter | |
|
|
| |
(Stationary) 40 Gal. | 152 Liter | ||
|
|
|
|
(Stationary) 60 Gal. | 227 | Liter |
OPERATION SHALL BE BY:
Direct steam at a minimum of 5 PSI (34 kPa) and a maximum of 35 PSI (241 kPa).
STANDARD FEATURES:
❑Stainless steel cabinet
❑One piece cover
❑2" Tangent draw off valve
❑Hydraulic tilt on tilt models
❑Steam control valve and steam trap
❑Swing drain
❑Hot and cold deck mount faucet
❑Pan carrier
❑316 Stainless steel liner on 20, 30 & 40 gallon unit
❑Adjustable hold down feet
OPTIONAL ITEMS AT EXTRA COST:
❑316 Stainless steel liner on 60 gallon models
❑50 PSI (345 kPa) for high temperature cooking
❑Spring assist cover DMS 20, 30 & 40
❑220 Volt power supply
❑Etched gallon markings
❑Etched liter markings
ACCESSORIES:
❑Graduated measuring strip
❑Solid strainer
❑Perforated strainer
❑Strainer hook
Job
Item#
Form DMT Rev 0 (01/07) | Printed in USA |