Southbend DMS-40 specifications Models, DMT-30, DMT-40, DMT-60, DMS-20, DMS-30, DMS-60, Dimensions

Models: DMT-30 DMT-40 DMT-60 DMS-20 DMS-30 DMS-40 DMS-60

DIMENSIONS

MODEL	CAPACITY	UNITS	A	B	C	D	E	F	G
DMT-30	30 Gallons	inches	24"	36"	16"	39"	37.25"	41.5"	65.26"
DMS-30	(114 liters)	(mm)	(610)	(914)	(406)	(991)	(946)	(1054)	(1657)
DMT-40	40 Gallons	inches	26"	36"	15"	40"	38.38"	42.5"	68.25"
DMS-40	(151 liters)	(mm)	(660)	(914)	(381)	(1016)	(975)	(1080)	(1733)
DMT-60	60 Gallons	inches	29.5"	42"	16"	43"	41.12"	47.62"	74.25"
DMS-60	(227 liters)	(mm)	(749)	(1067)	(406)	(1092)	(1045)	(1210)	(1886)

SERVICE CONNCETIONS

– COLD WATER: 3/8” O.D. tubing to faucet.

– HOT WATER: 3/8” O.D. tubing to faucet.

– DRAIN: 1-5/8” (41.275 mm) O.D. tubing piped to open floor drain. No solid connection.

– ELECTRICAL CONNECTION: (Tilt models only) 1/2” conduit connection to controls.

Unless otherwise specified, field wiring electrical connection to be 120V, 60 Hz, 1 Phase with ground.

– STEAM SUPPLY: 3/4" (19 mm) IPS for incoming steam. MIN 5PSI (34kPa), MAX 35 PSI (241 kPa).

Important: Pressure reducing valve required if incoming steam pressure exceeds the kettle rating.

INTENDED FOR COMMERCIAL USE ONLY.

NOT FOR HOUSEHOLD USE.

1100 Old Honeycutt Road, Fuquay-Varina, NC 27526

(919) 762-1000 www.southbendnc.com

Form DMT Rev 0 (01/07)