TELEPHONE FEATURES
REDIAL BUTTON
Automatically redials last number called (up to 32 digits). If the number was busy or unanswered:
1.Lift the HANDSET.
2.Press REDIAL button.
MUTE
Prevent sound from your room from being heard by another party on the phone.
Press and hold the MUTE button as long as you want this feature activated.
RESET
At the end of a call, you can make your next call without replacing the HANDSET in the cradle. Press and hold RESET button to disconnect the telephone.
LIGHTED KEYPAD
For better visibility when dialing in a dim light, a lighted dial pad is provided.
MEMORY DIALING
Your FM2552PX is equipped with 13 memories (three priority, ten two touch) for programming your most frequently dialed telephone numbers. You can store up to 16 digits in each priority key (M1, M2, M3) or in each of the numeric keys 0 through 9 by following the steps outlined. Numbers must be stored with the handset lifted.
NOTES:
•Your local phone company restricts the time you can have the handset off the base
•You should program the FM2552PX memory with the line cord unplugged from the wall, if you are going to program more than one phone number.
—13 —
MEMORY DIALING
TO PROGRAM PRIORITY KEYS
1.Lift the handset.
2.Press the STORE button.
3.Press the keypad to enter the number that you want to program. The LCD on the back of the handset confirms the numbers you entered.
4.Press STORE button. The ‘MEM’ will be displayed on the right corner of LCD.
5.Press M1, M2 or M3 button.
6.Return the handset to the CRADLE.
TO PROGRAM FREQUENTLY CALLED NUMBERS
1.Lift the handset.
2.Press the STORE button.
3.Press the keypad to enter the number that you want to program. The LCD on the back of the handset confirms the numbers you entered.
4.Press STORE button. The ‘MEM’ will be displayed on the right corner of LCD.
5.Press the memory location (0 to 9) on the keypad.
COPY FROM THE CALLER ID TO TELEPHONE MEMORY
Press 
or 
button until the Caller ID memory location to be copied appears on the LCD. Press STORE button twice to enter memory store. The ‘MEM’ will be displayed on the right corner.
Press the memory location
If no key is pressed within 20 seconds, the LCD will return to ‘Answer- Ready’ mode.
Repeat the above steps to store a different number in the same speed dial location, or to store a new number in a different speed dial location.
— 14 —
MEMORY DIALING
NOTES:
•Pressing REDIAL button will place a
•You can store a number with up to 16 digits maximum. Only the last 14 digits will be displayed.
TO DIAL PRIORITY NUMBER
1.Lift the handset.
2.Press M1, M2 or M3.
3.Your call will automatically be dialed.
TO DIAL FREQUENTLY CALLED NUMBERS
1.Lift the handset.
2.Press the MEMORY button.
3.Press the desired memory location button (0 to 9).
4.Your call will automatically be dialed.
NOTE: Remember to plug the telephone line cord back into the wall.
CALLER ID OPERATION
NOTE: BATTERIES ARE REQUIRED FOR CALLER ID OPERATION.
If an incorrect, invalid or incomplete Caller ID signal |
|
| AM |
is received, the LCD shows |
|
|
|
If only the caller’s phone number is received, the LCD shows the caller’s phone number with the time and date it was received. The ‘NEW’ icon turns on and New Call LED blinks.
— 15 —
