Southwestern Bell FM2575 , Caller ID Features (Cont.), Caller ID Features (Cont.)

2. While the display is in standby mode,

(Rotate the "REVIEW" knob to the

middle position, until there are no Caller

ID records displayed) press and hold the

"ERASE" Button for 2 seconds. The

LCD will show:

3. Press the "ERASE" Button again;

ALL VIEWED messages will be erased.

NOTE:

1. If there are messages that have not

been reviewed, the "Erase All Calls"

function cannot be performed.

2. VIP (Priority) calls will not be

erased when you erase all calls. See

VIP CALLS section for details.

3. Press "ERASE" Button again; the

CID will be erased and the LCD will

display the next call message.

To Erase All Calls

1. Rotate the "REVIEW" knob to

review the Caller ID records received

before erasing all calls.

Caller ID Features (Cont.)Caller ID Features (Cont.)

To Create a VIP Call:

1. Rotate the "REVIEW" knob to view the

caller ID information you received.

2. Press and hold "CALL BACK" Button

for 2 seconds until the "VIP" icon is

displayed.

To Remove a VIP Call:

1. Rotate the "REVIEW" knob to display

the call you have marked "VIP".

2. Press and hold "CALL BACK"

Button for 2 seconds. The "VIP"

icon will disappear.

VIP

NEW

CALL

NEW

CALL

VIP

NEW

CALL

1. 7 digits without a 1 : Assuming that

you have programmed your correct area

code, redial your local call by pressing

the "CALL BACK" Button once.

2. 7 digits with a 1 : Assuming that you

have programmed your correct area code,

scroll to the local 7 digit call you wish to

redial. Simply press the "CALL BACK"

Button twice.

3. 10 digits without a 1 : Due to the

software setup of the FM2575, the user

is instructed to insert their 3 digit local

area code. In some areas of the country,

one must include their area code when

making a local call. To solve this issue,

the user must reprogram their FM2575

to another 3 digit "fictitious" area code.

If you have priority calls in memory,

the display will show "CALL XX"

when all other calls have been erased.

VIP (Priority) Calls

The FM2575 allows you to create VIP

(priority) call records. When a VIP

(priority) call is received, the new call

LED will flash 4 times each time the

phone rings, to alert you this is a VIP

(priority) call.

NOTE: When the incoming VIP call is a

call waiting Caller ID call, NEW CALL

LED will flash 4 times every 6 seconds

until the call disappeared.

Caller ID Redial

The FM2575 allows you to redial a

phone number stored in the Caller ID

memory by pressing the "CALL BACK"

Button while reviewing a call record.

To redial a call record, follow these

steps:

NEW

CALL

1. Rotate the "REVIEW" knob to

select the Caller ID number that you

want to dial.

2. Press and release the "CALL BACK"

Button. The number will scroll across

the screen from right to left as it is dialed,

and the speakerphone will automatically

be turned on.

3. After the tones have stopped and a

connection has been made, lift the

handset or just speak.

With current Telecom redialing situations,

there are 4 redial options: (1) 7 digits

without a 1 prefix; (2) 7 digits with a 1

prefix; (3) 10 digits without a 1 prefix;

and (4) 10 digits with a 1 prefix.

We recommend using an area code not

currently being used in the U.S. (i.e. 100,

etc.) Once your area code is

programmed as above, your FM2575

will show all "10 digits" for every

incoming call. To redial a local 10 digit

call, press the "CALL BACK" Button

twice in succession. The "1" prefix is

then omitted and the local 10 digit call is

redialed out.

4. 10 digits with a 1 prefix: Simply

scroll to the desired Long Distance 10

digit call you wish to dial out. Press

down the "CALL BACK" button once

and release. If your area requires that

you add 1 and your area code even if the

call is within the same area code, then

you must reprogram your FM2575 to

another 3-digit "fictitious" area code.

The "1" prefix will be added before the

10 digit number and your long distance

call will be dialed out.

Note: Use caution when pressing the

CALL BACK button. Press and release

rapidly; if the CALL BACK button is

held down too long, the "VIP" feature

will be activated.

IF THE CALLER ID RECORD

DISPLAYS "PRIVATE CALL" OR

"OUT OF AREA", THE REDIAL

FUNCTION WILL NOT WORK FOR

THAT PARTICULAR RECORD.

Caller ID Erase

To Erase a Single Call

1. Rotate the "REVIEW" knob to review

the Caller ID records you received.

2. Press "ERASE" Button to erase

the call displayed; the LCD will

show "ERASE?".

NEW

CALL