Southwestern Bell FM2575 Telephone Operation, Telephone Features

Telephone Operation

Tone/Pulse Switch

SET THIS SWITCH TO THE

SERVICE (TONE OR PULSE)

SUPPLIED TO YOUR PHONE.

If you are not certain of which service

you have, set the switch to TONE. Lift

the HANDSET and press any number on

the KEYPAD. If the dial tone persists,

reset to pulse.

Dialing a Call

1. Lift the HANDSET or press the

SPEAKERPHONE Button (the

SPEAKERPHONE Button will light).

2. When you hear a dial tone, dial the

number.

During the conversation, the

Speakerphone loudness can be adjusted

with the SPEAKER VOLUME

CONTROL on the side of the BASE.

The Receiver loudness of the Handset

can also be adjusted with the

RECEIVER VOLUME CONTROL

on the side of the HANDSET.

3. At the end of the call, return the

HANDSET to the cradle or, if you

have used the SPEAKERPHONE,

press the SPEAKERPHONE Button

again. The SPEAKERPHONE

Button LED will go OFF.

Receiving a Call

1. When you hear your phone ring,

lift the HANDSET or press the

SPEAKERPHONE Button (the

SPEAKERPHONE Button will light).

After the first ring, the LCD display will

light, the NEW CALL icon and call

information will appear on the display,

and the New Call LED will flash. The

New Call icon and New Call LED

continue flashing until you review ALL

your new calls.

The caller ID information will be stored

in the order received.

2. At the end of your call, return the

HANDSET to the CRADLE or press the

SPEAKERPHONE Button again

(the SPEAKERPHONE Button LED will

turn OFF).

When switching a call from the

HANDSET mode to the SPEAKERPHONE

mode, press the SPEAKERPHONE Button

before you place the HANDSET in the

CRADLE. To switch from the

SPEAKERPHONE to the HANDSET, lift

the HANDSET.

NOTE:

1. If you answer your telephone before

the second ring, the unit will not display

any caller ID information .

2. The information will be displayed

on the LCD for 20 seconds. The maximum

number of digits that can be displayed on the

LCD is 10 and the maximum call count is

64 (old call + new call). Your FM2575

will automatically erase the oldest call

record and replace it with the newest call

record when the memory is full.

NEW

CALL

Telephone Features

Ringer Off/Low/High

Your FM2575 features a ringer which can

be adjusted to loud (high) or soft (low).

When you don't want to be disturbed, slide

the switch to the OFF position. Now you

can still make outgoing calls, but you will

not be disturbed by incoming calls.

Redial

The last number you dialed (up to 32

digits) is automatically stored in REDIAL

MEMORY.

To redial that number:

1. Lift the HANDSET or use the

Speakerphone. You will hear a dial tone.

2. Press the REDIAL/PAUSE Button. The

last number dialed is automatically

redialed, including pause. The LCD will

display: "REDIAL"

NOTE:

No Redial function is executed if the

last number is more than 32 digits.

"FULL" will be displayed.

• With the TONE/PULSE switch in the

pulse (P) mode, dial your access number.

• Press the * Button (your telephone

will change the dialing mode from pulse

to tone, and a four second pause will be

inserted automatically.)

• Dial your code/authorization number.

• When the call is completed, your tele-

phone will return to the pulse dialing

mode automatically.

NOTE: Combination dialing can also be

used with the memory dialing feature

for two-touch access of your long dis-

tance or computer service.

Pause

Whether you have Tone or Pulse service,

you can insert a 4-second PAUSE into

the dialing or storing of a number into

memory to access custom and tele-

banking services, long distance, etc.

Press the REDIAL/PAUSE Button at the

desired point in the number. Press

REDIAL/PAUSE again if an additional 4

seconds is needed.

Hearing Aid Compatibility

The FM2575 is compatible with induc-

tively coupled hearing aids.

Flash

If call waiting is available from your tele-

phone company and you have this ser-

vice, you will be alerted by a signal

(determined by your telephone company)

if there is another call.

Pulse/Tone Combination Dialing:

Combination dialing is useful to sub-

scribers of rotary (pulse) service who

wish to gain access to various low cost

long distance and computer services

otherwise unavailable to them.

Note: The telephone will be muted

momentarily while the LCD display shows

the Caller ID information.

1. When you hear the signal, to access the

new call without disconnecting the call

you are on, press the FLASH Button.

2. To return to your original conversation,

press the FLASH Button again. This

procedure can be repeated as frequently as

you desire.