CALLER ID SETUP
To Set Language
1.After the Handset battery is fully charged, the LCD display will show “SET LANGUAGE”.
2. Press the REVIEW “” or “” button to select ENGLISH, FRENCH or SPANISH.
3.Press the MEM key to confirm the displayed language. The unit will begin to set area code.
To Set Area Code
1.Simply enter your area code number using the number pad on the handset. Press the MEM key to confirm.
2. The unit will begin to set the contrast.
NOTE: If there is no input within 20 seconds, the program will go back to the “SET LANGUAGE” step.
To Set Contrast
1.Press the “” or “” button to adjust the display
contrast to the desired level (darker or lighter). If there is no input within 20 seconds, the program will go back to the “SET LANGUAGE” step.
2.Press the MEM key to confirm the displayed contrast
level. The unit will show the default Time/Date (12:00 A.M. 1/01). The time and date will be automatically updated when the first incoming Caller ID call is received.
NOTE:
1.The Caller ID setup procedure will not begin until the handset is fully charged.
2.To set up your GH3012 again, press and hold the MEM button for 2 seconds in Date/Time screen.
3.Your GH3012 will always stay in setup mode, until you complete the setup steps. However, it will still record the Caller ID information. This information can be reviewed only after set up is complete.
4.To adjust the LCD display contrast while in the standby or review mode, press the FLASH button.
TELEPHONE OPERATION
Tone / Pulse Operation
The GH3012 will operate on tone or rotary (pulse) systems.
1.If your house is wired for rotary service, move the Tone/Pulse switch to the Pulse position.
2.If your house is wired for Tone Service, move the Tone/Pulse switch to the Tone position.
3.If you are unsure of the type of dialing service you have, set the switch to Tone. On the handset, press the TALK button and dial any digit on the keypad. If the dial tone persists, switch to Pulse. To disconnect, press the TALK button again, or set the handset in the cradle.
Digital Security System
Your GH3012 Cordless Telephone is equipped with a digital security coding system to protect your base unit from being accessed by other cordless telephones.
The code allows your base and handset to recognize each other so that other cordless phones will not make calls on your line.
If the AC adaptor is disconnected or a loss of power occurs while the handset is away from the base unit, the security code will be lost and the phone will be inoperable. If this occurs, reconnect the AC adaptor and return the handset to the base unit so that the security code is reset.
When the handset is not in the base, only a handset having the identical security code and operating on the same channel can access the base and use your phone line.
When the handset is in the base, no other handset, even those having the identical security code and operating on the same channel can access the base and use your phone line.
Digital security coding will also eliminate the “false” ringing associated with cordless telephones not equipped with this feature.
14 | 15 | ||
|
|
|
|
|
|
|
|
