TELEPHONE OPERATION (CONT.)
CALLER ID OPERATION
Memory Feature
Your GH3012 is equipped with 10 memories for programming your most frequently dialed telephone numbers. You can store up to 16 digits in each of the memory locations 0 through 9 by following the steps outlined.
To Retrieve Stored Numbers:
1. | Pick up Handset. |
2. | Press TALK, and then MEM button. |
3. | Press the desired memory location |
number. The number you programmed | |
will be dialed automatically. | |
Or |
|
Receiving a Call
After the first ring, the caller’s name and telephone number will display on the LCD. The New Call LED will flash until you review ALL your new calls.
IMPORTANT:
You must subscribe to Call Waiting and Call Waiting Caller ID service from your local telephone company in order to receive Call Waiting Caller ID information.
A record of the numbers to be speed- dialed may be kept on the memory index chart on page 24 in this manual.
To Program Frequently Called Numbers
1.Pick up the handset. DO NOT PRESS TALK button.
2.Press the MEM button; the LCD display will show the number stored in MEM 0 (zero).
3.Press “” or “” buttons to select an available location.
4.Dial phone number (up to 16 digits). Each TONE (*) entered uses one of the available digits. If you pause more than
20seconds in programming, the unit will exit the memory programming. If you accidentally press a 17th digit, 3 error tones will sound, press DEL button to erase digits or press CH button to exit.
4.Press the MEM button again. the LCD display will show “LOCATION ? x” where “x” is the location you selected.
5.Press MEM button again to confirm. The LCD display will show “MEM x STORED” to confirm the number has been successfully stored in memory.
NOTE: Press CH button at any time to exit memory programming.
18
1.Press MEM button, then press “” or “” buttons to select desired memory location.
2.Press CALLS button. The number you programmed will be dialed automatically.
To Change a Stored Number:
1.Press MEM button and “” or “” buttons to select memory location.
2.Press DEL button to erase memory. The LCD display will show “ERASE ?”.
3.Press DEL button to confirm.
4.Reprogram the new number.
Redial
Your GH3012 remembers the last number dialed.
1.Press the TALK button on the handset. When you hear a dial tone, press the REDIAL button. Or
2.Press the REDIAL button, the last number will be shown on the LCD display. Press the CALLS button.
Pause |
You can insert a
The Caller ID information (of up to 64 callers) will be stored in the order received. If the received call information is the same as any of the new calls, the unit will display the “RPT” icon to indicate a repeat call. If the unit receives more than 64 calls, the oldest Caller ID information will be erased.
NOTE:
If you answer your incoming call before the second ring, the unit will not display the call information.
Receiving Call Waiting Caller ID
When you are on an existing phone call, your GH3012 will display incoming call waiting Caller ID information.
1.You will hear a beep and the telephone will be muted momentarily while the LCD display shows the Caller ID information of the second caller.
2.When you access the call waiting call, the Caller ID information will disappear and the Time/Day screen will be displayed.
Reviewing New Call Records
1. When Time/Date screen is displayed, pressing the “” or “” button will display the information for the last new call received.
2.Continue pressing “” or “” button to review all new call records in the order the calls were received.
When a name received exceeds 12 characters, the first 12 characters will be shown first with “” showing on the right hand side. Press the “” button to view the remaining characters.
3.After the final call has been displayed, press the “” or “” button again. The New Call LED will stop blinking and the LCD will show “END NEW CALL”.
NOTE:
If you do not review all new calls, the Time/Date screen will display after 20 seconds and the new call counter will show the total number of new calls received (including those you just reviewed).
19
