SOYO SY-5SSM/5 Boot Sequence, Swap Floppy Drive Boot Up NumLock Status, Memory Parity Check/ ECC

BIOS Setup Utility SY-5SSM & SY-5SSM/5

3-2.3 System Boot Control Settings

System Boot Control Settings

Quick Power On Self Test

Setting	Description	Note
Disabled
Enabled	Provides a fast POTS at	Defaul
	boot-up.	t

Boot Sequence

A, C, SCSI

C, A, SCSI

C, CD-ROM, A

CD-ROM, C, A

D, A, SCSI

E, A, SCSI

F, A, SCSI

SCSI, A, C

SCSI, C, A

Conly LS/ZIP, C

Choose the boot sequence adapted to your needs, for example:

•[A, C, SCSI] means the BIOS will look for an operating system first in drive A, then in drive C, and eventually in SCSI device.

Swap Floppy Drive

Boot Up NumLock Status

Disabled		Default
Enabled	Changes the sequence
	of A and B drives.
On	Puts numeric keypad in	Default
	NumLock mode at boot-
	up.
Off	Puts numeric keypad in
	arrow key mode at boot-
	up.

Memory Parity

Check/ ECC

Check

Enabled	This allows to perform a Default
	redundancy check on the
	parity bit in the data
	strings. This method is

used for error detection when the parity is not found.

Disabled

44