SOYO SY-P4VSA quick start Installation

Hardware Installation

SY-P4VSAQuick Start Guide

2 Installation

To avoid damage to your Motherboard, please follow these simple rules while handling this equipment:

Before handling the Motherboard, ground yourself by touching on to an unpainted portion of the system's metal chassis.

Remove the Motherboard from its anti-static packaging. Hold the motherboard by the edges and avoid touching its components.

Check the Motherboard for damage. If any chip appears to be loose, press carefully to seat it firmly in its socket.

Follow the directions in this section which is designed to guide you through a quick and correct method to install your new SY-P4VSAMotherboard. For detailed information, please refer to the SY-P4VSA Motherboard User's Manual and Technical Reference online manual on the CD-ROM that came with your Motherboard.

Gather and prepare all necessary components to complete the installation successfully: Socket mPGA 478 processor with built-in CPU cooling fan (boxed type) SDRAM module (s)

Computer case with adequate power supply unit Monitor

PS/2 Keyboard

Pointing Device (PS/2 Mouse) Speaker(s) (optional)

Disk Drives: HDD, CD-ROM, Floppy drive…

External Peripherals: Printer, Plotter, and Modem (optional)

Internal Peripherals: Modem and LAN cards (optional) VGA Card (AGP, PCI)

6