Spalding M316001 manual Flat or Angled Roof

FLAT OR ANGLED ROOF (continued)

4. Drill holes in roof. Position angled

B. brackets and secure to roof.

WARNING!

All mounting points should be sealed to prevent leaks and water damage"

23

27 & 26

Keep assembly upright and position

4. struts (23) on desired location on roof approx. 26”-30” (66-76 cm) apart.

C. Level in all directions. Mark and drill holes. Secure struts in place.

Not Included

with Hardware

23

Note position of angle brackets (26 & 27) in relation to pole bracket per style roof.

NOTE:

To achieve 106-3/4” (2.7 m) you may have to make some adjustments such as moving angled brackets backward or adding height to the entire assembly with wood between angled brackets and roof.

WARNING!

USE CAUTION; ASSEMBLY IS HEAVY. TWO CAPABLE ADULTS REQUIRED FOR THIS PROCEDURE. FAILURE TO FOLLOW THIS WARNING COULD RESULT IN SERIOUS INJURY AND/OR PROPERTY DAMAGE.

WARNING!

Minimum distance should be 106-3/4” (2.71

m)from top elevator

hole to playing surface. Homeowner must assume all responsiblilty for any personal or property damage if backboard height is lower than recommended.

106-3/4”

(2.71 m)

11 01/07 ID# M316001