IX Maintenance, Chuck Replacement, Cleaning

Use:	For:
Oil	Steel
Turpentine or parafﬁn	Aluminium
Do not lubricate	Brass, copper or cast iron

Drilling plastics and plastic coated chipboard

▪Use high speed drill bits

▪See drilling wood below

Drilling masonry

▪For maximum performance use carbide-tipped masonry impact bits when drilling holes in brick, tile, concrete etc.

▪Turn the mode selector to hammer mode, then rotate the torque collar to the drill position.

▪Apply light pressure and medium speed for best results in brick.

▪Apply additional pressure and high speed for hard materials such as concrete.

▪When drilling holes in tile, practice on a scrap piece to determine the best speed and pres- sure.

Drilling wood

▪For maximum performance, use high speed steel bits for wood drilling.

▪Ensure that the mode selector is in normal drill- ing mode.

▪Begin drilling at a very low speed to prevent the bit from slipping off the starting point. Increase the speed as the drill bites into the material.

▪When drilling through holes, place a block of wood behind the work piece to prevent rag- ged or splintered edges on the back side of the hole.

WARNING. Never attempt to lock the trigger switch in the on position, do not lock the trigger on jobs where your hammer drill may need to be stopped suddenly.

All drilling operations

▪Mark off the centre of the hole using a centre punch or nail.

CHUCK REPLACEMENT

Chuck removal

Always wear eye protection.

Turn the torque adjustment collar/hammer selec- tion collar (2) to the “drill” position and low gear, on the gear selector (13). Tighten the chuck around the shorter end of a hex key (not supplied) of 5 mm or greater size.

Using a wooden mallet or similar object, strike

the longer end in the clockwise direction. This will loosen the screw inside the chuck. 11

1.Open chuck jaws fully.

2.Insert a 5 mm hex key into front of chuck be- tween jaws to engage screw head. Remove screw by turning clockwise.

3.Place the hex key in chuck and tighten. Using a wooden mallet or similar object, strike key sharply in the anti-clockwise direction. This will loosen the chuck so that it can be unscrewed by hand.

Chuck installation

1.Screw the chuck on by hand as far as it will go and insert screw (LH thread).

2.Tighten the chuck around the shorter end of hex key (not supplied) strike the longer end in the clockwise direction with a wooden mallet. 12

3.Remove the hex key and open the jaws fully. Tighten the screw in the centre of the chuck firmly, with the hex key in an anti-clockwise di- rection.

IX - Maintenance

WARNING. Always ensure that the tool is switched off before making any adjustments or maintenance procedures.

CLEANING

▪Keep the tool’s air vents unclogged and clean at all times.

▪Remove dust and dirt regularly. Cleaning is best done with a rag.

▪Re-lubricate all moving parts at regular inter- vals.

CAUTION! Do not use cleaning agents to clean the plastic parts of the tool. A mild detergent on a damp cloth is recommended. Water must never come into contact with the tool.

GENERAL INSPECTION

Regularly check that all the ﬁxing screws are tight. They may vibrate loose over time.

EN 8	BUR 15E • BUR 18E

pages-BUR15-18-[13mm].indd8

22.3.2006 ã. 09:05:35

BUR 15E specifications

The Sparky Group BUR 15E is an innovative power tool designed for both professional and home use, tailored to meet the needs of various users in the construction, renovation, and DIY sectors. This versatile tool combines advanced technology with user-friendly features that make it a top choice for those requiring efficient and effective performance.

One of the main features of the BUR 15E is its powerful 1,500-watt motor, which delivers an impressive performance across a range of applications. This strong motor ensures that the tool offers high torque and speed, enabling users to tackle tough jobs with ease, from drilling to chiseling. The BUR 15E comes equipped with variable speed control, allowing users to adjust the speed according to the material being worked on, thus ensuring optimal results and preventing damage to workpieces.

The design of the Sparky Group BUR 15E prioritizes user comfort and safety. Its ergonomic handle provides a secure grip, reducing fatigue during extended use. Additionally, the tool features a robust safety system that includes an automatic shutdown function in case of overheating, protecting both the user and the tool itself.

Technologically, the BUR 15E utilizes an innovative electronic speed control system that maintains a consistent speed under load, ensuring the quality of work remains high even on challenging tasks. The inclusion of a built-in electronic clutch prevents over-tightening and protects the user from potential kickback, further enhancing its safety profile.

Another significant characteristic of the BUR 15E is its versatility. The tool is compatible with a wide range of accessories and attachments, making it suitable for various applications such as drilling, hammer drilling, and chiseling. This adaptability makes it an ideal choice for users who need a flexible solution for different projects.

The Sparky Group BUR 15E also boasts a durable construction, designed to withstand the rigors of frequent use in demanding environments. Its high-quality materials ensure longevity, making it a worthwhile investment for professionals and DIY enthusiasts alike.

In conclusion, the Sparky Group BUR 15E stands out as a powerful and reliable tool that combines advanced technology with essential features aimed at enhancing user experience. With its potent motor, ergonomic design, electronic controls, and versatility, it is well-equipped to handle a myriad of tasks with efficiency and precision, making it a valuable addition to any toolkit.

Sparky Group BUR 15E IX Maintenance, Chuck Replacement, Cleaning, General Inspection

Models: BUR 15E