POWER TOOL USE AND CARE

▪Do not force the power tool. Use the correct power tool for your application. The correct power tool will do the job better and safer at the rate for which it was designed.

▪Do not use the power tool if the switch does not turn it on and off. Any power tool that cannot be controlled with the switch is dangerous and must be repaired.

▪Disconnect the plug from the power source be- fore making any adjustments, changing acces- sories, or storing power tools. Such preventive safety measures reduce the risk of starting the power tool accidentally.

▪Store idle power tools out of the reach of chil- dren and do not allow persons unfamiliar with the power tool or these instructions to operate the power tool. Power tools are dangerous in the hands of untrained users.

▪Maintain power tools. Check for misalignment or binding of moving parts, breakage of parts and any other condition that may affect the power tool’s operation. If damaged, have the power tool repaired before use. Many accidents are caused by poorly maintained power tools.

▪Keep cutting tools sharp and clean. Properly maintained cutting tools with sharp cutting edges are less likely to bind and are easier to control.

▪Use the power tool, accessories and tool bits etc., in accordance with these instructions and in the manner intended for the particular type of power tool, taking into account the working conditions and the work to be performed. Use of the power tool for operations different from intended could result in a hazardous situation.

SERVICE

▪Have your power tool serviced by a qualified repair personnel using only identical replace- ment parts. This will ensure that the safety of the power tool is maintained.

IV - Additional safety rules for drills

Wear ear protectors with impact drills. Expo-

sure to noise can cause hearing loss.

Use auxiliary handles supplied with the tool. Loss of control can cause personal injury.

▪If possible, always use clamps or a vice to hold your work.

▪Always switch off before you put the drill down.

▪Ensure that the lighting is adequate.

▪Do not put pressure on the drill, such that it slows the motor down. Allow the drill bit to cut without pressure. You will get better results and you will be taking better care of your tool.

▪Keep the area free of tripping hazards.

▪Do not let anyone under 18 years operate this tool.

▪Only use accessory bits in good condition.

▪Before drilling, check that there is sufficient clearance for the drill bit under the workpiece.

▪Do not touch the bit after operation. It will be very hot.

▪Keep your hands away from under the work- piece.

▪Never use your hands to remove sawdust, chips or waste close by the bit.

▪Rags, cloths, cord, string and the like should never be left around the work area.

▪Support the work properly.

▪If you are interrupted when operating the drill, complete the process and switch off before looking up.

▪Periodically check that all nuts, bolts and other fixings are properly tightened.

▪When using the drill, use safety equipment in- cluding safety glasses or shield, ear defenders, and protective clothing including safety gloves. Wear a dust mask if the drilling operation cre- ates dust.

If in doubt, do not plug in the tool. Using a power source with a voltage less than the nameplate rat- ing is harmful to the motor.

The tool must be used only for its prescribed pur- pose. Any use other than those mentioned in this Manual will be considered a case of misuse. The user and not the manufacturer shall be liable for any damage or injury resulting from such cases of misuse.

To use this tool properly, you must observe the safety regulations, the assembly instructions and the operating instructions to be found in this Man- ual. All persons who use and service the machine have to be acquainted with this Manual and must be informed about its potential hazards.

Children and frail people must not use this tool. Children should be supervised at all times if they are in the area in which the tool is being used. It is also imperative that you observe the accident prevention regulations in force in your area. The same applies for general rules of occupational health and safety.

The manufacturer shall not be liable for any changes made to the tool nor for any damage re-

EN 4

BUR 15E • BUR 18E

pages-BUR15-18-[13mm].indd4

22.3.2006 ã. 09:05:33

Page 3 Page 5
Page 4
Image 4
Sparky Group BUR 15E instruction manual IV Additional safety rules for drills, Power Tool USE and Care, Service
Page 3 Page 5

BUR 15E specifications

The Sparky Group BUR 15E is an innovative power tool designed for both professional and home use, tailored to meet the needs of various users in the construction, renovation, and DIY sectors. This versatile tool combines advanced technology with user-friendly features that make it a top choice for those requiring efficient and effective performance.

One of the main features of the BUR 15E is its powerful 1,500-watt motor, which delivers an impressive performance across a range of applications. This strong motor ensures that the tool offers high torque and speed, enabling users to tackle tough jobs with ease, from drilling to chiseling. The BUR 15E comes equipped with variable speed control, allowing users to adjust the speed according to the material being worked on, thus ensuring optimal results and preventing damage to workpieces.

The design of the Sparky Group BUR 15E prioritizes user comfort and safety. Its ergonomic handle provides a secure grip, reducing fatigue during extended use. Additionally, the tool features a robust safety system that includes an automatic shutdown function in case of overheating, protecting both the user and the tool itself.

Technologically, the BUR 15E utilizes an innovative electronic speed control system that maintains a consistent speed under load, ensuring the quality of work remains high even on challenging tasks. The inclusion of a built-in electronic clutch prevents over-tightening and protects the user from potential kickback, further enhancing its safety profile.

Another significant characteristic of the BUR 15E is its versatility. The tool is compatible with a wide range of accessories and attachments, making it suitable for various applications such as drilling, hammer drilling, and chiseling. This adaptability makes it an ideal choice for users who need a flexible solution for different projects.

The Sparky Group BUR 15E also boasts a durable construction, designed to withstand the rigors of frequent use in demanding environments. Its high-quality materials ensure longevity, making it a worthwhile investment for professionals and DIY enthusiasts alike.

In conclusion, the Sparky Group BUR 15E stands out as a powerful and reliable tool that combines advanced technology with essential features aimed at enhancing user experience. With its potent motor, ergonomic design, electronic controls, and versatility, it is well-equipped to handle a myriad of tasks with efficiency and precision, making it a valuable addition to any toolkit.
Top Page Image Contents